These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
Go from one-sided to dual-sided power measurement with Garmin's Vector 2S Upgrade Pedal. With your standard 2S system (sold separately) you only have power data from your left leg, which leaves the possibility of unknown discrepancies between your left and right sides. Injuries, natural imbalances, and other factors that leave one side of your body less powerful than the other are common. By measuring power from both legs, you get a much more accurate picture of what you're doing and how to improve on any asymmetry you might have.
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
$165.00 - $420.00
Syzr Pedal Systems transfer power more efficiently to your off-road rig. Rider power is delivered to Syzr pedals directly through the cleats, not through the spongy rubber lugs of the shoe sole. Direct, Through-the-Cleat Power Transfer ensures that no rider energy is lost during transmission. SYZR pedals also use Active Cleat Stabilization Technology to improve the precision of the pedal/cleat connection and eliminate the slop and lateral instability common to off-road pedals. With advanced Roller-Cam Release Technology, Speedplay ensures consistent release in wet or muddy conditions. Instead of the usual metal-to-metal connection that allows other pedals and cleats to seize during release, Syzr cleats feature Ceramic Roller-Cams that do not seize when wet because they roll. In addition to improving consistency of release, the ceramic contacts provide exceptional, long-term durability.
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side
- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included
Shimano's Dura-Ace SPD-SL Pedals boast world-class entry and exit and extra-wide stainless-steel plated carbon composite platforms for amazing lateral stability, unmatched pedaling power and exceptional durability. These lightweight, low-profile pedals provide a natural feel, and they hang vertically for quick entry. Incredibly durable, low-friction bearings withstand years of pedaling, and adjustable release tension lets you dial in these pedals just for you.
- Weight: 168g Ti - Body: Carbon Injection-Molded - Spindle: Titanium - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed) *Titanium spindles have a 180lbs rider weight limit.
$214.00 - $225.00
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
$199.00 - $209.00
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard.
• Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodized finish • The axle is made of high strength Cr-Mo, heat treated and plated • The platform is slightly concave in shape to give maximum support • Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life • Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
$179.90 - $199.90
- Gigantic, lightweight aluminum platform with concave foot bed - High load DU bushing and cartridge bearing - Included Flip Pins are blue. Silver, black, red, or gold pins are sold separately - DM-1837 Brendog Brendan Fairclough signature model, murdered - 105x115x17mm
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) - Colors: Black, Gray, Orange, Pink *Titanium spindles have 180lbs weight limit.
Speedplay's Light Action Stainless pedals are the easiest Speedplays to get into, so they're the perfect solution for seasoned cyclists with delicate knees, and first-time clipless-pedal users alike. They provide 15-degrees of knee-saving float without the self-centering action inherent in most pedals, so you don't work against spring tension. Their compact and low-profile design positions your feet closer to the axles for maximum power transmission and excellent cornering clearance. They boast durable stainless-steel axles with needle and two cartridge bearings for smooth spinning and feature dual-sided entry and early release for super easy starts and stops.
Speedplay's X/2 pedals provide knee-saving unlimited float without the self-centering action inherent in most pedals, so your knees don't have to work against spring tension. They also boast a stainless steel spindle, needle and dual cartridge bearings for smooth spinning, and a dual-sided design for extremely easy entry and exit. A compact, low profile positions your feet closer to the axles for maximum power transmission and unmatched cornering clearance.
• Low-profile, lightweight, wide aluminum body with double-concave platform. • Platform size: 101x114cm • 4 Full sealed cartridge bearings per pedal • Super thin double concave wide platform • Hex-head threaded pin design offers more bite for added security • Fore and aft angled bottom-loading pins • Hidden pin / Grease access port • 20 SHCS hex traction pins per pedal
• Wide pedal-to-shoe contact area • Wider bearing placement for increased rigidity • Slimmer, lighter axle • Low platform height for pedaling stability • Lightweight: 310g pair • Oval shape axle body housing for smoother mud & debris flow • Slimmer axle unit increases open space between bindings • Robust, dependable retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong , durable chrome-moly spindle with 8mm hex wrench mount
• Extremely wide pedal-to-shoe contact area • Wide pedal platform for more pedaling stability • Wider bearing placement for increased rigidity • Increases stability and control when not clipped in • Protects binding mechanism against impacts • Oval shape axle body housing for smoother mud & debris flow • Slimmer axle unit increases open space between bindings • Robust retention claws provide smooth engagement and release • Adjustable entry and release tension settings • Strong, durable chromoly spindle with 8mm hex wrench mount
$165.00 - $169.00
Introducing the new Candy 7: all new body shape with premium stainless steel and aluminum components, and integrated traction pad technology for an even more refined fit, feel, and power transfer. A ribbed body and chamfered edges allow for better traction when unclipped and reduce rock strikes. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
- Weight: 210g CrMo - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
$144.00 - $154.00
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver DH-worthy durability that shrug off hard use and big hits. The open design quickly sheds mud for reliability in sloppy conditions and the eight adjustable traction pins per side grip well when you're riding clipped out in corners.
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Page 1 of 8 Next page