Tools

Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.

Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. - T-handle is ideal for transferring controlled tightening torque and high loosening torque - Error-free screwdriving due to non-slip friction clutch and exact torque transmission - Tamper-proof against accidental changing of set torque value - Corrosion-resistant blade

The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.

Wera torque screwdriver. Featuring a Kraftform pistol handle for high torque transfer, the multi-component handle is easy on the hands and makes for ergonomic screwdriving with hard and soft zones for high working speeds. - Fixed torque setting with highest precision. - Unlimited torque to loosen seized screws - Suitable for bits with 1/4" hexagon head drive - Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck - Rapidaptor technology for rapid bit change - Distinct signal when pre-set value is reached

Rear Shock Clamp Adapters - Connects rear shock tools to the RockShox Rear Shock Clamp Tool

Eyelet Bushing Tool

Monarch/Deluxe IFP Height Tool

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-4 has 1.7mm tips on bent nose blades for larger, internal snap rings. The tips open from 21mm down to 2mm (center to center).

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

- Premium syringes offer enhanced clarity, improved durability, and ergonomic handles. - Innovative quarter-turn valves make it easy to quickly open and close the bleed system. - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician. - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers. - Available separately for DOT fluid and mineral oil systems, each kit contains adapters for nearly all disc brake systems on the market. - Deluxe case keeps small parts organized and protected. -01: (Black Seal) : fit most DOT fluid brakes from Avid, SRAM, Formula, Hayes, and Hope -02: (Red Seal) : fit most mineral oil brakes from Shimano, Magura, Tektro, TRP, and Hayes

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

RockShox XLoc Parts

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules

The most compact adjustable torque socket available. Works with a 5mm Allen wrench or any mini-tool with a 5mm Allen key to provide correct tightening of frame and component bolts to recommended torque values for safety and performance. - Torque range: 2 – 6Nm - Functions: 7 - Tool Material: Hardened steel - TorqSocket Material: Steel / Aluminum - Rubber strap, Carry case - Size: 6.9 x 1.7cm / 2.7” x 0.7” (TorqSocket) - Weigh (TorqSocket) : 72g / 2.54oz - Weight: (TorqSocket+bits+case): 128g / 4.51oz Tools: - 3 / 4 / 5 Allen bits - T20 / T25 Torx bits

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

- Use to install fork dust seals

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Get the most from your Bontrager Switch Lever thru axle system. Product details - Original equipment replacement lever for Bontrager Switch Flip thru axles - Can be kept inside the thru axle or left off the bike to save weight - Lever is held securely by internal O-ring on the thru axle